I have a C.O. on one end and and my main building wiring closet on the other. Wiring closet has 72 ethernet switch ports in it. It also currently has servers. I want to first and foremost move the servers to the other location.
From: Carl Peterson Sent: Thursday, August 6, 2020 1:07 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] a real af question I think what people are getting at here is what else do you want to do with the switches? 1G? 10G? 100G SFP interfaces? Quantity of each you are looking for. 1G Copper port count? POE for cameras etc? if so, what type. On Thu, Aug 6, 2020 at 1:58 PM <[email protected]> wrote: Draw two boxes. Put fiber between the two boxes. Now, what goes on the end of the fiber....? From: TJ Trout Sent: Thursday, August 6, 2020 10:56 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] a real af question Chuck, i'll design it for you :) hit me off list! On Thu, Aug 6, 2020 at 9:39 AM <[email protected]> wrote: Yeahbut, what would be a good brand. Are the FS things OK. I have had good luck with UBNT. Really don’t want to pay for Cisco. On second look Netonix may not be the best option. I would really like 48 vdc power but most of them don’t have that option. I have sinewave inverters at both ends so I can do AC but I just didn’t want to. From: Lewis Bergman Sent: Thursday, August 6, 2020 10:29 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] a real af question They make them in a wide variety of capacity and port configs. On Thu, Aug 6, 2020, 10:41 AM <[email protected]> wrote: Yeah, I guess I could do media converters. But the switches on one end are a bit old. I suppose I could put a 48 port POE with SFP on one end and the media converter at the other. From: Lewis Bergman Sent: Thursday, August 6, 2020 9:36 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] a real af question We always used Plantronics. They may be out of favor now but they make industrial switches with DIN mounts that are as small as two ports. On Thu, Aug 6, 2020 at 10:05 AM <[email protected]> wrote: I need to connect two offices with fiber. Going to put a switch on both ends with an SFP. 48 volts power. Rack mount. I need a recommendation. I may do Netonix but I would like to hear opinions. -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- Lewis Bergman 325-439-0533 Cell -------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com ---------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com ------------------------------------------------------------------------------ -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- Carl Peterson PORT NETWORKS 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707 -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
