450m does do 5ms as well. They added it around 16.1 I think. On Tue, Aug 18, 2020 at 9:41 AM Sean Heskett <[email protected]> wrote:
> everything has to be one or the other. no way to sync 2.5 and 5 together. > > going to 5ms you should see about 10% boost in performance > > On Tue, Aug 18, 2020 at 9:44 AM Sam Lambie <[email protected]> wrote: > >> I am replacing some 450 AP's with 450i so I can utilize 40mhz channels >> and a little better throughput. Currently All my 450m AP and 450 and 450i >> Ap's are synced to 15 miles, 75% and 6 contention slots. Everything is >> happily humming along with these settings. Easy enough to duplicate at >> 40mhz And call it good. But I like to try to squeeze as much throughput as >> I can out my network. >> With the replacement, I am curious if I were to go to 5 ms frames on the >> AP's, how the heck do I sync the settings? It seems impossible as the start >> and end Slots have basically doubled when going to 5.0 ms frames. >> I have within earshot of this site about 10- 450m AP's spread out over >> 15-20 miles. They don't do 5.0 ms, so I am wondering if I am going down a >> rabbit hole... >> Has anyone colocated AP's with mixed frames? Does it work? I also have 2 >> ePMP 2000 AP's at this site as well to add to the fun... >> >> Thanks >> >> -- >> -- >> *Sam Lambie* >> Taosnet Wireless Tech. >> 575-758-7598 Office >> www.Taosnet.com <http://www.newmex.com> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
