scripts is easiest. writing your own tcp stack is an option virtual adapters is an option secondary tik is what i have for techs so nothing needs reconfigured
if you find the answer to your question, i want to know On Wed, Aug 26, 2020 at 11:58 AM Adam Moffett <[email protected]> wrote: > Since I'm a cheater: > > I used to get my DHCP address and set it statically. Then I could add > extra IP's in common subnets for device management. My default gateway > goes with the office IP, so I have LAN/Internet access, but since my > computer also has 192.168.1.x and 169.254.1.x and 192.168.0.x I can reach > the default IP's on things just by plugging them into the LAN. > > So I guess the stupid/simple thing is use a static IP in your office, then > add secondary IP's on all of the likely management networks. > > > On 8/26/2020 11:48 AM, [email protected] wrote: > > I am glad to see there is no stupid-simple solution that I was simply > unaware of. > I think I will re-create the scripts and icons. > They were simple and worked well. Just took a bit of study to create them > in the first place. > > *From:* Craig Baird > *Sent:* Wednesday, August 26, 2020 9:41 AM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] a basic question > > Multiple NICs? Maybe get a USB ethernet dongle for the laptop. Also, if > you can access your internal networks via WiFi, that would fix that issue. > Of course, this all assumes that your various IP subnets don't conflict or > overlap in any way. > > Craig > > > On Wed, Aug 26, 2020 at 9:35 AM Jim Bouse [Brazos WiFi] < > [email protected]> wrote: > >> We use a program called NetSetMan. It’s inexpensive for commercial use. >> >> >> >> Jim Bouse >> Owner - Brazos WiFi >> 979-999-7000 >> http://www.brazoswifi.com >> >> >> >> *From:* AF <[email protected]> *On Behalf Of *[email protected] >> *Sent:* Wednesday, August 26, 2020 10:25 AM >> *To:* [email protected] >> *Subject:* [AFMUG] a basic question >> >> >> >> I feel silly asking this but I honestly don’t know if there is a better >> way. >> >> Willing to risk the embarrassment of a simple answer. >> >> >> >> Frequently plugging a laptop into a management port or something. >> 192.168.1.1 So I need to set the laptop IP manually to 192.168.1.11 or >> some such thing. >> >> Then I find I immediately need to connect to some DHCP device and right >> back to the management port. And then to perhaps check email I need to go >> to a 10.x.x.x or a 172 subnet internally. >> >> >> >> Once upon a time I wrote some scripts and associated them with icons to >> reconfig the ethernet IPV4 settings to various things I need to access from >> time to time. >> >> Is there a better way where I will never have to change configs? >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > ------------------------------ > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
