Gen Z worst case scenario:  “My Firestick is clocking”. Have you seen a doctor?

Sent from my iPhone

> On Aug 27, 2020, at 6:56 PM, Ken Hohhof <[email protected]> wrote:
> 
> 
> My Internet isn’t strong enough, my Firestick is clocking.
>  
> From: AF <[email protected]> On Behalf Of Dave
> Sent: Thursday, August 27, 2020 7:52 PM
> To: [email protected]
> Subject: Re: [AFMUG] [ External ] Audio tune 450i SMs?
>  
> Just Say no to internet or should I say Netflix LOL!
> 
> We  have seen a trend where customers check their internet based on if their 
> TV works well LOL
> 
>  
> 
> On 8/27/2020 3:19 PM, Ken Hohhof wrote:
> BTW we never use a headset, we use those little amplified speaker pucks that 
> you charge with a USB charger.  Drives customer dogs crazy, but sometimes 
> useful to demonstrate an issue to customer down on the ground.  Like yes, 
> their tall tree swaying in the wind is the problem.  Or see how I shift my 
> weight and your TV tower tilts and it affects the signal.  Or listen to the 
> tone change with the wind turbine blades turning.  Oh wow, the tech isn’t 
> feeding me a line of B.S.
>  
> From: AF <[email protected]> On Behalf Of Sam Lambie
> Sent: Thursday, August 27, 2020 3:02 PM
> To: AnimalFarm Microwave Users Group <[email protected]>
> Subject: Re: [AFMUG] [ External ] Audio tune 450i SMs?
>  
> I'll find out tomorrow. I just made a cable without resistors. I can't hear 
> shit in the high frequency tones and wear hearing aids, so this will be a 
> good test.
>  
> On Thu, Aug 27, 2020 at 1:11 PM Matt Mangriotis via AF <[email protected]> 
> wrote:
> The resistors change the frequency of the tone. In fact, some people may 
> prefer the tone without any resistors at all… and sometimes (perhaps 
> inadvertently) the tone frequency changes with updates to the software 
> revision.
>  
> The team does test this feature, but I can’t say that I have first hand 
> experience using it with a cable with that specific value resistor… so 
> couldn’t tell you what it sounds like on the currently released version of 
> software.
>  
> From: AF <[email protected]> On Behalf Of Ken Hohhof
> Sent: Thursday, August 27, 2020 1:58 PM
> To: 'AnimalFarm Microwave Users Group' <[email protected]>
> Subject: Re: [AFMUG] [ External ] Audio tune 450i SMs?
>  
> I bought one 450i SM by mistake once, I somehow thought the 3 GHz SM with the 
> integral panel was discontinued when the 450b came out.  And I built one of 
> those stupid cables, including the 220 ohm resistors (which I suspect aren’t 
> really needed).  Have you tried to buy resistors lately?  No more Radio 
> Shacks, Frys doesn’t carry components anymore, I found some in the 
> discontinued items bin at MicroCenter.
>  
> Bottom line, when I realized I would also need a 48V POE, I put that SM on 
> the shelf where it still sits today.  I’m not sure why you’d want one.  On 
> top of everything else, it’s very expensive.  I think its claim to fame is 
> the dynamically tuned front end filter, which I guess would help if you had 
> extremely high adjacent channel interference.
>  
> I should really put it on eBay or something.
>  
> From: AF <[email protected]> On Behalf Of Matt Mangriotis via AF
> Sent: Thursday, August 27, 2020 12:38 PM
> To: AnimalFarm Microwave Users Group <[email protected]>
> Cc: Matt Mangriotis <[email protected]>
> Subject: Re: [AFMUG] [ External ] Audio tune 450i SMs?
>  
> Sam – Please see this forum post…
>  
> https://community.cambiumnetworks.com/t/pmp450i-sm-alignment-tones/54898
>  
> Matt
>  
> From: AF <[email protected]> On Behalf Of Sam Lambie
> Sent: Thursday, August 27, 2020 12:27 PM
> To: AnimalFarm Microwave Users Group <[email protected]>
> Subject: [ External ] [AFMUG] Audio tune 450i SMs?
>  
> I just installed my 1st 450i sm and am stumped on how to tune with an audio 
> speaker like the old 450 and 450bs. 
>  
> What am I missing? 
> -- 
> AF mailing list
> [email protected]
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
> 
>  
> --
> -- 
> Sam Lambie
> Taosnet Wireless Tech.
> 575-758-7598 Office
> www.Taosnet.com
> 
> 
> -- 
> AF mailing list
> [email protected]
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to