FWIW I think you have an issue with the fiber mounting. The "Ground Lug" is supposed to hold the Fiberglass strength members from the drop cable. This helps keep the cable from getting pistoned in or pulling out. The copper line on the drop cable is a tracer and should not be connected to anything at either end. At least that is how I was taught.
On Wed, Sep 9, 2020 at 8:13 PM Chuck McCown <[email protected]> wrote: > I think I will switch to a mechanical. Too cumbersome to haul out an > expensive fusion splicer. > > > > Sent from my iPhone-- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- -Louis NTInet O: 803-533-1660 X 207 C: 803-997-0004
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
