Made out of 100% “for parts-not working” from eBay. It will power my switches and cameras in my main building.
Sent from my iPhone > On Sep 20, 2020, at 7:02 PM, Chuck McCown <[email protected]> wrote: > > Good point. We can probably put a sheet of plastic over them. > Hopefully they don’t gas much on float service. > > > Sent from my iPhone > >> On Sep 20, 2020, at 6:17 PM, Ken Hohhof <[email protected]> wrote: >> >> Can you move the rectifier shelf or whatever that is up a few more RMUs >> above the batteries? I don't know if those are SLA or vented batteries, in >> any case I'm a klutz and would like a little more room above the batteries >> in case I ever have to replace them or work on the wiring. If they are >> vented, I'd want the electronics a little farther away from the corrosive >> sulfuric acid fumes (and the explosive hydrogen fumes). >> >> I know you probably want to keep the center of gravity low, but the >> batteries should have that taken care of. >> >> >> -----Original Message----- >> From: AF <[email protected]> On Behalf Of Chuck McCown >> Sent: Sunday, September 20, 2020 6:51 PM >> To: [email protected] >> Subject: [AFMUG] Sunday project >> >> >> >> >> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
