Are we talking about AC on the contacts? Coil will only work with what it’s specified for (AC or DC).
Contacts will be fine with AC if they have a DC rating. The inverse isn’t necessarily true. Mark > On Sep 21, 2020, at 3:17 PM, Bill Prince <[email protected]> wrote: > > But the reverse is generally not a problem. AC RMS current is much less > demanding than continuous DC current. > > > > bp > <part15sbs{at}gmail{dot}com> > On 9/21/2020 9:40 AM, [email protected] <mailto:[email protected]> wrote: >> I have had AC coil relays get stuck closed with putting DC on them. >> >> From: TJ Trout <> >> Sent: Monday, September 21, 2020 10:30 AM >> To: AnimalFarm Microwave Users Group <> >> Subject: Re: [AFMUG] Site Monitor Relay Question >> >> it will work fine >> >> On Mon, Sep 21, 2020 at 8:34 AM <[email protected] <>> wrote: >> Yes, some do. Some will get magnitized if they are AC relays and you use DC >> on them. >> >> -----Original Message----- >> From: Nate Burke >> Sent: Monday, September 21, 2020 9:29 AM >> To: Animal Farm >> Subject: [AFMUG] Site Monitor Relay Question >> >> The Specsheet for the 4 channel relay output unit says 1A@24VDC. I want >> to control some HVAC Dampers that are running at 24VAC. The Relay >> doesn't care if it's VAC or VDC right? >> >> -- >> AF mailing list >> [email protected] <> >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> >> >> >> -- >> AF mailing list >> [email protected] <> >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> >> >> -- >> AF mailing list >> [email protected] <mailto:[email protected]> >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> >> >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
