That's exactly what I was wondering about regarding max amperage.
On 9/24/2020 3:18 PM, Eric Muehleisen wrote:
You might check with Forest on the max output power of the PIDU. We
tried (4) CBRS 450M's on one card which caused weird power reboots on
random AP's. We were using a 600W power supply, which might have been
the issue as well. 3 AP's have been working just fine however.
On Thu, Sep 24, 2020 at 10:18 AM Josh Baird <[email protected]
<mailto:[email protected]>> wrote:
We're deploying our first 450M gear soon. This site will have
a +48VDC ICT rectifier solution and DC distribution (managed).
We're going to be using a PacketFlux RackInkjector w/ Cambium Sync
modules to provide sync to the 450M 3ghz radios. We could load a
PDU module in the RackInjector as well to provide power to them.
Alternatively, we could power them directly off of the ICT managed
distribution.
Both solutions are managed (can turn them on/off via IP). Is
there any reason to use the PacketFlux PDU module over the DC
distribution panel in this scenario?
Cheers,
Josh
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
<http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
