Maybe you have a different model than we use or some such, but our guys
just double tap it.
Put two wires into the same hole on the block and tighten it down.
Boom. Done. It's under a little cover so nobody will see your sin.
On 10/9/2020 10:58 AM, Mark - Myakka Technologies wrote:
We use Cyberpower BBU for our Fiber ONT's. It uses a custom plug that
has the green terminal plugs on either end. I have a situation where
I need to add a small mikrotik router to the system. I would like to
tap the 12vdc from the BBU to power the mikrotik. I can do a DIY tap
using a male and female screw connector. But was wondering is there
was a more professional option out there. Did a few google searches
with no good results.
--
Thanks,
Mark mailto:m...@mailmt.com
Myakka Technologies, Inc.
www.Myakka.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com