Force 200 always felt great to me. Force 300 seems to be hit or miss, not sure why. Haven't dug into it. No customer complaints...
ePMP link test is "like UDP". It is not in fact UDP. In my experience I'd get very close to the link test results in UDP or TCP. Josh Luthman 24/7 Help Desk: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Dec 10, 2020 at 10:36 AM Eric Muehleisen <[email protected]> wrote: > 450 has a variety of link test methods. With or without bridging seems to > give a very good representation of the overall capable throughput of the > SM. Extrapolated might be another story. > > ePMP link tests seem to take into account the throughput of the AP at the > time of the test. SM's connected at MCS 15 seem to only test at around 30mb > on a busy AP, whereas an SM on less busy AP (same tower) will test at 80mb. > Can anyone confirm this? > > I thought I once heard that ePMP uses UDP packets for link tests. If that > is the case, then would you want to take an additional 5-10 percent off the > linktest to gain a better idea of it's overall throughput capabilities? > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
