Yup, Cambium/Ceragon has adapters for most interfaces. I’m sure others do as well.
Jeff Broadwick CTIconnect 312-205-2519 Office 574-220-7826 Cell [email protected] > On Dec 10, 2020, at 6:09 PM, Ken Hohhof <[email protected]> wrote: > > > Any chance your radio manufacturer sells an adapter from whatever mount is > already on the antennas? Like we have gone the opposite way, we had some > existing antennas with Remec circular because the original radios were Trango > Apex Plus, and we got a Remec-to-Ceragon adapter through Cambium. > > For a 2 ft dish I would maybe just replace the dish, for 3 ft and above it’s > maybe worthwhile trying to use what’s there. Depending on how much you enjoy > mounting dishes on towers. > > From: AF <[email protected]> On Behalf Of Jason McKemie > Sent: Thursday, December 10, 2020 4:53 PM > To: AnimalFarm Microwave Users Group <[email protected]> > Subject: Re: [AFMUG] Commscope Valuline Remec > > Yes, they do. I wish I had gone with them initially. I'm looking to use some > antennas that are already in the air for this particular link. Apparently > Commscope completely stopped making Remec mounts for their antennas. > > On Thursday, December 10, 2020, Ken Hohhof <[email protected]> wrote: > Does Radiowaves make what you need? They are more expensive but we usually > like their mechanical design better and they tend to need less assembly work. > Wish they had provisions for a stiff arm on the smaller dishes though. > > From: AF <[email protected]> On Behalf Of Jason McKemie > Sent: Thursday, December 10, 2020 4:08 PM > To: AnimalFarm Microwave Users Group <[email protected]> > Subject: Re: [AFMUG] Commscope Valuline Remec > > Thanks, that's disappointing. I like the antennas, but may have to switch > vendors. > > On Thursday, December 10, 2020, Eric Nielsen <[email protected]> wrote: > Hi Jason, > > I'm with CommScope. Just checked with the antenna group and they confirmed > that it has been discontinued due to low volumes. > > Thanks, > Eric > > On Thu, Dec 10, 2020 at 11:21 AM Jason McKemie > <[email protected]> wrote: > Is anyone out there using a Commscope 11GHz antenna with a remec circular > interface? Commscope is telling me the interface plate is discontinued, which > seems strange since I would think it would be a fairly common type. -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
