I presume if the float voltages are the same you could. But not if they are different.
From: SmarterBroadband Sent: Wednesday, February 3, 2021 11:52 AM To: 'AnimalFarm Microwave Users Group' Subject: Re: [AFMUG] Battery recommendations at fiber hut Can you connect batteries like this, with built in BMS, directly into a system like ICT made for SLA/AGM? Adam From: AF [mailto:[email protected]] On Behalf Of Louis Arsenault Sent: Wednesday, February 3, 2021 4:48 AM To: AnimalFarm Microwave Users Group <[email protected]> Subject: Re: [AFMUG] Battery recommendations at fiber hut We have been using PowerTec Solutions https://www.powertecsolutions.net/solutions/#psi-micro-vision-48v-rackmount-battery-series We have 4 of them setup in the fiber hut. They have a BMS to protect the batteries from overcharging / overcurrenting On Tue, Feb 2, 2021 at 3:33 PM Josh Luthman <[email protected]> wrote: I'm looking at a 1200 watt load and would like to see 2 or 3 hours of run time. Everything's 48vdc. I'm kind of leary about using lithium ion since I'm using an ICT power supply and their system is designed for SLA/AGM. What kind of things should I be looking for? I thought these looked pretty good: https://www.batteriesplus.com/productdetails/battery/sla-sealed-lead-acid/12/wkdc12=80pus 12v*80a=960whr 4 of these = 3840whr Runtime upwards of 3.2 hours (obviously there will be loss, but shouldn't I expect 2+ hours)? Josh Luthman 24/7 Help Desk: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
