I have a P2P circuit plugged into a CRS317-1G-16S+ and setting PVID3000
on that bridge interface. A Mikrotik CCR1009 is plugged into another
port on the CRS317 set for trunked VLan3000. I can move IPv4 traffic on
Vlan3000 and to the other end of the P2P circuit just fine, but I cannot
move any IPv6 traffic on Vlan3000.
The Vlan shouldn't care about IP4 vs IP6 traffic, right? I just want to
make sure I'm not causing my own problem before pointing my finger at
the Circuit.
The IPv6 package is not installed on the CRS317, because it's just
acting as a switch, it's not doing any routing. That shouldn't matter,
right?
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
