+1
They don't need connectors at all. Just tin the ends (neatly), and that's really all that's needed. Dressing the wires in an enclosure is right behind that.
bp
<part15sbs{at}gmail{dot}com>
I just tin them
On Thu, Mar 25, 2021, 9:23 AM Adam Moffett <[email protected]> wrote:
--Not sure what problem you need to solve.
If you mean the serial connection between devices those are RJ-11 telephone plugs.
If you've had wires fall out of the green screw down terminals then I'd suggest some strain relief to prevent any weight from hanging down on the wire. One way is add a lacing bar or wire duct so you only have a few inches of unsupported wire going into the green plug. There are eleventy billion connectors in the Molex catalog so I'm not going to say there is or isn't a crimp-on replacement. I'd suggest if you want that then ask Packetflux support what the part number of the plug is and then ask the manufacturer if there's something else compatible.
On 3/25/2021 9:30 AM, Ryan McAfee wrote:
Is there a recommended crimp-on connector that fits the terminals on the sitemonitor products?
Ryan
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
