Gotta grill the new guy... I didn't watch the video, so maybe I will. The site, though, looks like every other RFE product page. The product looks like any other RFE sector I've had (through obviously with a couple of tweaks here and there).
Admittedly, I haven't delved into it too deeply, but I guess that's mostly because it doesn't seem that different than your existing products. ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Caleb Knauer" <[email protected]> To: "AnimalFarm Microwave Users Group" <[email protected]> Sent: Thursday, April 15, 2021 8:52:25 AM Subject: Re: [AFMUG] Best 90degree Sector to use with UBNT LTU APs The site and the intro video embedded does a good job explaining it, and I'm still learning the ropes here. But the main point is that there are inherent limitations of a patch array sector style antenna on its ability to maximize beam efficiency (basically how much RF energy goes out the main lobe vs what's lost to side/back lobes). The Array Sector antenna is built to maximize the beam efficiency to be the best possible. The gain is uniform across the whole spectrum, the V and H patterns are balanced which keeps your chain to chain performance even, and the back shield cuts out the lobes and makes for better colocation without the need for aftermarket shields. The build quality is great, and it's set up for all the standard slide and click radios like LTU, 3k, mimosa, etc. This makes for an optimized sector as best as you can get it. While our primary focus is on the horn market, the array sector definitely has a place in a tools in the tool box approach. Typically these are used where clients are spread out across the coverage area, density is relatively low, and the distances are relatively long. Usually used in more rural deployments, but we're seeing folks mix them with horns in various layouts as well. We find that for LTU, the 60 degree asymmetric horn is typically the best fit for its mix of coverage area, gain, and noise isolation. Noise isolation is really important with LTU as that platform doesn't like noise at all, and typically a 90 degree pattern is too wide. You want a tighter coverage area with the best noise isolation that you can get, and the asymmetric horn fits that bill perfectly. Anyone looking for a deeper dive, please feel free to reach out and I can set up a chat with Tasos as he can explain this in deeper detail with more nuance than I can at the moment. We'll be in Dallas also. I'll be mainly handing out shirts and trying not to answer stuff wrong :-D On Thu, Apr 15, 2021 at 8:53 AM Mike Hammett < [email protected] > wrote: What's so special about the new sector? ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP From: "Caleb Knauer" < [email protected] > To: "AnimalFarm Microwave Users Group" < [email protected] > Sent: Thursday, April 15, 2021 7:48:09 AM Subject: Re: [AFMUG] Best 90degree Sector to use with UBNT LTU APs RF elements array sector is what you want if you want a 90-ish degree sector. 3db drop is around 75 degrees, 6db is around 100 degrees. Patterns on the site along with further info. https://rfelements.com/products/array-sector/array-sector-antennas/overview/ Lot of horn choices are available too depending on your deployment. A mix of horns and sectors might fit the bill even better. Email me at [email protected] (I work there now) and we can set up a call to go into detail. On Wed, Apr 14, 2021 at 4:37 PM Paul McCall < [email protected] > wrote: > > What sayeth the crowd? putting in a dozen or so LTU APs and looking for best > performing sectors (90 and 60 degrees) > > thanks! > > Paul > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
