No, I forced them both to the same antenna. I figured if it was timing
thing, then both on the same antenna should fix that.
They've been up for the last hour since I forced them to the sector,
reporting same distance and identical Signal levels.
On 4/16/2021 9:08 AM, Steve Jones wrote:
Did you force one to each antenna?
On Fri, Apr 16, 2021, 8:12 AM Nate Burke <[email protected]
<mailto:[email protected]>> wrote:
Forcing them to the smart antenna didn't help, just forced them to
the sector to see what happens.
On April 15, 2021 7:07:15 PM CDT, Steve Jones
<[email protected] <mailto:[email protected]>> wrote:
If you're compounding it with multipath, those tiny timeslices
probably have more overlap to the same antenna. I dont know
the math so I'm probably wrong
On Thu, Apr 15, 2021, 4:48 PM Nate Burke <[email protected]
<mailto:[email protected]>> wrote:
I didn't think of that if they're using the 2 separate
uplink antennas. But I would have thought the scheduler
would keep that from happening.
I just forced them both to the smart antenna. We'll see
what happens.
On 4/15/2021 4:38 PM, Steve Jones wrote:
image.png
If distance is fluctuating it could be multipath,
eliminating that as much as possible will help.
but having them on two different uplink antennas may help
ensure the AP isnt "blinded" on the uplink.
the AP Rx should be pretty much even, if theyre not and
one is fluctuating more than the other it may be the
multipath culprit. I dont know if theres shrouds for
these like ubnt had, but if you have one of the old NSM
shrouds you could try affixing it with the gap away from
the other radio to shield the two somewhat. It wont fit
all the way around but could give you an idea of whether
you should go to the machine shop. I dont know if RFArmor
is still a thing or not
On Thu, Apr 15, 2021 at 4:22 PM Nate Burke
<[email protected] <mailto:[email protected]>> wrote:
Yes, distance is fluctuating. Right now they're
showing equal distance. And both re-reged within 30
seconds of each other 10 minutes ago.
Do you mean set the preferred AP?
Don't have a good way to get vertical separation.
On 4/15/2021 4:18 PM, Steve Jones wrote:
can also try locking one to the sector
On Thu, Apr 15, 2021 at 4:17 PM Steve Jones
<[email protected]
<mailto:[email protected]>> wrote:
Is the SM distance fluctuating? Can you
get vertical separation, 18 inches?
On Thu, Apr 15, 2021 at 3:51 PM Nate Burke
<[email protected] <mailto:[email protected]>>
wrote:
I have a rooftop that has an existing
Force300-25 radio on it for
several months. I just added a new
Force300-25 radio on a new mount
next to it, so they are separated by a few
feet horizontally. Both
radios are now re-associating randomly to
the EPMP3000Ap with Beam
Steering Antenna every couple hours. Has
anyone else seen this? These
are the only 2 SM's on the AP that are
dropping. In the AP wireless
table, it also thinks that they are 0.5
miles different in distance.
Signal levels are exactly the same.
I've seen the Signal levels do strange
things when EPMP SM's are close
together, but I haven't seen the radios make
each other drop out before.
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
