It sucks. That's how it is. If it's 5 GHz you can do it over RF. If it's 3 GHz you can't because it'll have to reach a SAS to transmit.
Josh Luthman 24/7 Help Desk: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Apr 22, 2021 at 11:14 AM Nate Burke <[email protected]> wrote: > I'm getting ready to deploy my first set of 450M radios, from my bench > testing, and reading through the manual, do you have to Choose which > data path is active, Copper OR Fiber? And the only way to switch it if > that path is down is to log into the Radio with an SM connection over > the RF? That can't be right can it? > > The EPMP radios bridge the copper and Fiber inside the radio so both are > active. That doesn't seem to be the case with the 450M. Does the 450M > only allow one data path, and if it breaks your SOL unless you can gain > sudo-physical access to the AP? I have be missing where you set the > primary/secondary data path, but I haven't been able to find it yet. > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
