The first location is a house with internet and the second location
needs it. It's not the only way to get the second location on line.
I'm just looking for the most bullet proof solution that will minimize
support calls.
Josh Luthman wrote:
That's kind of a basic networking question, what's the overall
topology look like? Does this second building already have internet
and you're back feeding? Is this fiber connection between the two
buildings the only way the second building gets online?
Josh Luthman
24/7 Help Desk: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Aug 25, 2021 at 12:57 PM Jay Weekley
<[email protected] <mailto:[email protected]>> wrote:
It's going to be connected to a switch on both ends. Will that be
a problem?
Bill Prince wrote:
> Ethernet has no ground reference. It's a differential signal. If
> you're using shielded cable, only ground one end (or neither
end), and
> you'll be fine.
>
>
> bp
> <part15sbs{at}gmail{dot}com>
>
> On 8/25/2021 8:53 AM, Jay Weekley wrote:
>> I've got a client that needs a network line installed from their
>> house to another building but they are on separate power
meters. I
>> understand that running a cable between two different ground
points
>> is not advisable. Is there a way around this? A wireless link
isn't
>> an option at this point.
>
--
*Jay Weekley*
*Cyber Broadband
*
--
This email has been checked for viruses by AVG.
https://www.avg.com
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
*Jay Weekley*
*Cyber Broadband
*
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
