FWIW - we have a WTM4200 with a CCR2004 on one end and don't have that issue.
On Thu, Aug 26, 2021 at 3:13 PM Joe Novak <[email protected]> wrote: > Test with anything other than a CCR2004. I'd be willing to bet on it being > the problem. > > On Thu, Aug 26, 2021 at 2:05 PM Jason McKemie < > [email protected]> wrote: > >> Are you familiar with the Aviat radios? I cannot seem to find anywhere >> to set flow control on the ethernet interfaces. >> >> On Thu, Aug 26, 2021 at 1:25 PM Colin Stanners <[email protected]> >> wrote: >> >>> Have you tried Flow Control off/on, on both devices, at one end's >>> Ethernet link? What model of MT router? >>> >>> On Thu, Aug 26, 2021, 1:20 PM Jason McKemie < >>> [email protected]> wrote: >>> >>>> I'm having an issue where about 3-8% of packets going through a WTM4200 >>>> link are seeing a 1-10ms spike in latency. Aviat support is not being >>>> particularly helpful, they just say they're seeing CRC errors at one end >>>> and to replace the SFPs and cabling to see if that helps. These have a >>>> fiber connection and are powered through the DC port. The radios / SFPs / >>>> fiber at both ends are new. I've already replaced the SFPs on the attached >>>> Mikrotik routers with Aviat SFPs with no change in the issue. >>>> Incidentally, I'm seeing the issue when I ping from the Mikrotik routers to >>>> their respectively attached WTM - so the issue is both ends and not a >>>> single one. Has anyone seen anything like this? >>>> -- >>>> AF mailing list >>>> [email protected] >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
