The AP is in AP PTP mode and the station is in PTP mode. The AP
settings were un-diddled with on the old still operational powerbeam
The LBE in station mode at first wouldn't even find AP on a scan the
first several times. The station is wanting to connect, keeps trying
but won't. We took the old powerbeam AP down, the tech dropped it 30ft,
so it's probably not going to work any more. We replaced the unit with
a new LBE 5AC gen2 LR and the backhaul link is working now. This was
the second time we've attempted to repair a powerbeam 5ac iso link by
using a LBE 5ac gen2 only because that's what we have and someone at
ubiquiti insisted they work together. 2 failures says they don't work
together.
On 1/12/22 00:58, Timothy Steele wrote:
do you have 1 in PTP mode and the other just in standard AP or station
mode?
Really hard to guess without any screenshots
On Wed, Jan 12, 2022 at 1:44 PM Jan-GAMs <[email protected]> wrote:
both using 8.7.5
On 1/11/22 13:05, Aeron Wireless wrote:
FirmWare mismatch?
sent from my android phone
On Tue, Jan 11, 2022, 4:04 PM Jan-GAMs <[email protected]>
wrote:
The station radio died, access point still working. Both are
powerbeam
5 AC. I had heard somewhere that an LBE 5 AC gen2 would
connect to a
powerbeam 5AC. Both models run AirOS 8. From the LBE I can
select the
powerbeam AP in the wireless tab but the radios refuse to
connect. Not
happening.
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
