In case it’s not obvious, the 5mhz “receive start” happens before the 30mhz “transmit end”. So the 30mhz AP is going to cause uplink interference on the 5mhz AP…..assuming there’s channel overlap.
From: [email protected] <[email protected]> Sent: Wednesday, May 04, 2022 10:10 AM To: 'AnimalFarm Microwave Users Group' <[email protected]> Subject: RE: [AFMUG] Cambium Timing I don’t know specifically how. But here’s frame calculator result for 30mhz, 75%, 10 miles, 8 control slots: AP Antenna Transmit End : 34161, 3.416176 ms AP Antenna Receive Start : 36530, 3.653073 ms AP Antenna Receive End : 49175 Now same at 5mhz: AP Antenna Transmit End : 27916, 2.791688 ms AP Antenna Receive Start : 30551, 3.055120 ms AP Antenna Receive End : 49104 Not even close to a match. If you haven’t been adjusting for channel size you’d better double check yours. From: AF <[email protected] <mailto:[email protected]> > On Behalf Of castarritt Sent: Wednesday, May 04, 2022 10:04 AM To: AnimalFarm Microwave Users Group <[email protected] <mailto:[email protected]> > Subject: Re: [AFMUG] Cambium Timing How does channel width affect timing? On Wed, May 4, 2022 at 7:39 AM <[email protected] <mailto:[email protected]> > wrote: Yes, those all match. The new challenge is comparing different channel sizes. From: AF <[email protected] <mailto:[email protected]> > On Behalf Of Carl Peterson Sent: Tuesday, May 03, 2022 11:14 AM To: AnimalFarm Microwave Users Group <[email protected] <mailto:[email protected]> > Subject: [AFMUG] Cambium Timing We still have our cambium network timed as if it were collocated with legacy 100 gear but the 100 gear is long gone so I'm looking to re-time everything. Not finding colocation info about 450M, 450, 450i. Is timing all the same on them? Seems to be but I haven't done this in over a decade. -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
