Four 150ah batteries would be a lot more coin than 12v to 48v if you can
afford the run time loss.

On Tue, Aug 15, 2023 at 9:53 AM Brian Webster <[email protected]>
wrote:

> How many of the batteries do you have? Do you need any voltages other than
> the 48 volts? If you have 4 batteries and only need 48 volts then wire them
> in series and not have to deal with the converter.
>
>
>
> Thank you,
>
> Brian Webster
>
>
>
>
>
> *From:* AF [mailto:[email protected]] *On Behalf Of *
> [email protected]
> *Sent:* Tuesday, August 15, 2023 6:59 AM
> *To:* 'AnimalFarm Microwave Users Group'
> *Subject:* Re: [AFMUG] battery nerd question
>
>
>
> *You’re around C/30 which should be on the high end *of capacity*.
>
> Lower load usually means a little extra capacity out of the battery.  I
> realized that sentence might have been ambiguous.
>
>
>
>
>
> *From:* [email protected] <[email protected]>
> *Sent:* Tuesday, August 15, 2023 6:56 AM
> *To:* 'AnimalFarm Microwave Users Group' <[email protected]>
> *Subject:* RE: [AFMUG] battery nerd question
>
>
>
> You can do the whole thing in Watts.
>
>
>
> 12V * 150ah = 1800 Watt-hours
>
> 1800Wh / 50W = 36 hours
>
>
>
> If they’re telling me 95% efficiency, I’d assume 50W out needs 53W in (50
> / 0.95).
>
> There’s usually an efficiency curve for the device based on load and
> temperature so it wouldn’t be 95% in all circumstances.  Your system should
> be drawing less than 5A off the battery, and if your multimeter has a 10A
> fuse like most do, then you could put the meter in line and actually
> measure the amperage before and after the converter.  Then you’d know for
> sure.
>
>
>
> And the battery’s total capacity will have a curve based on C-rate so
> there’s some variability there too.  Usually it lasts longer when you’re
> drawing lower amperage.  You’re around C/30 which should be on the high
> end.
>
>
>
> Age and maintenance of the battery affect runtime as well.  If I want 6
> hours of runtime then I plan Ah for 12 hours runtime. When my batteries are
> halfway toasted I’m still getting useful life out of them.
>
>
>
>
>
> *From:* AF <[email protected]> *On Behalf Of *Steve Jones
> *Sent:* Monday, August 14, 2023 9:57 PM
> *To:* AnimalFarm Microwave Users Group <[email protected]>
> *Subject:* [AFMUG] battery nerd question
>
>
>
> Just trying to cipher runtimes
>
> I have on hand 150ah 12 volt batteries, so thats what id be looking to use.
>
> Excluding the conversion loss of a 12v to 48v step up converter is the
> math correct here?
>
> 12v 150ah=1800 watt hours
> 1800 watt hours at 48v = 37.5ah
> 50 watts of radio running 48v = 1.04 amps
> 37.5ah @ 1.04 amps = 32.77 hours runtime
>
>
>
> does a step up that claims 95% efficiency mean 95% of the watt hours?
> --
> AF mailing list
> [email protected]
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to