If you're putting that rod through a pole, spend an extra $2 on a square curve washer for the back side: https://www.linemen-tools.com/Square_Curved_Washer_2_1_2_x_2_1_2_x_3_16_J6822_p/h-j6822.htm
What you're describing might be a conduit standoff bracket. That same linemen-tools.com site may have something similar if you dig through their catalog. -Adam -----Original Message----- From: AF <[email protected]> On Behalf Of Matt Sent: Tuesday, February 20, 2024 2:54 PM To: [email protected] Subject: Re: [AFMUG] Wood Pole Mount I like this but pricey but still will likely go with it if I find nothing else. https://www.commscope.com/product-type/structural-support-tools-accessories/structural-support-equipment/structural-mounts/pipe-mounts/itemdb365w/ I saw one on a pole a few weeks back that had a banding bracket with a hose clamp that went around the steel pipe and a long bolt that went through the wood pole. Been looking online for something like that with no luck. Its like above with bolt through pole but instead of clamp kit it had a banding bracket and hose clamp to attach to the metal pipe. Have used j-arms for this before but they're flimsy and have had them blow over in the wind. Not wanting that to happen in this application. On Tue, Feb 20, 2024 at 9:29 AM Matt <[email protected]> wrote: > > I need to mount a small steel pole to a wood light pole. The kits I > see online are like $300 range and way more robust than I need. Just > mounting a small yagi a few feet above the top of the wood pole. Does > anyone know of anything? -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
