I want to know if Chuck has a 4K Blu-ray player in his home theater. https://www.theverge.com/24046669/4k-blu-ray-streaming-physical-media-bitrate-picture-audio-quality-collector
From: AF <af-boun...@af.afmug.com> On Behalf Of Steve Jones Sent: Thursday, February 29, 2024 2:09 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] Wood Pole Mount "I sold off all my tower mount business to a local fabricator. Not sure if he is doing the chain mount or not. " WTF chuck On Tue, Feb 20, 2024 at 12:20 PM Chuck McCown via AF <af@af.afmug.com <mailto:af@af.afmug.com> > wrote: I sold off all my tower mount business to a local fabricator. Not sure if he is doing the chain mount or not. Hunter Clark hun...@c3fab.com <mailto:hun...@c3fab.com> Best Regards, Chuck McCown McCown Technology Corporation 8401 N Commerce Dr Lake Point, Utah 84074 801-250-9503 Office 435-830-4306 Cell www.mccowntech.com <http://www.mccowntech.com> www.microtrench.pro <http://www.microtrench.pro> www.terabitnetworks.com <http://www.terabitnetworks.com> From: Jeff Broadwick - Lists Sent: Tuesday, February 20, 2024 11:10 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Wood Pole Mount Chain mount. Chuck has them as does PV and CommScope. Regards, Jeff Jeff Broadwick CTIconnect 312-205-2519 Office 574-220-7826 Cell jbroadw...@cticonnect.com <mailto:jbroadw...@cticonnect.com> On Feb 20, 2024, at 1:06 PM, Ken Hohhof <khoh...@kwom.com <mailto:khoh...@kwom.com> > wrote: I think I’ve got some of the Valmont ones on the shelf. Like everything from SitePro1, they are huskier than they look in the catalog. From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > On Behalf Of dmmoff...@gmail.com <mailto:dmmoff...@gmail.com> Sent: Tuesday, February 20, 2024 11:40 AM To: 'AnimalFarm Microwave Users Group' <af@af.afmug.com <mailto:af@af.afmug.com> > Subject: Re: [AFMUG] Wood Pole Mount +1 to both of those suggestions. * I’ve seen plenty of universal mounts attached to a wooden pole (J-arms, J-pipes, or whatever you want to call them). * Rohn WM4 is the name brand galvanized 4” wall mount, but there are a thousand copies out there. Just watch out for zinc plating or other BS finishes. I’m sure Channel Master is fine. One other thing, you’re not supposed to drill into the top surface of a wooden pole because rain will pool in the holes and speed up rotting. You’re also not supposed to drill the sides within so many inches of the top (4” maybe? I don’t recall). That’s why those pole-top mounts you see are straddling the top and have bolt holes farther down. If you put a galvanized pipe into one of those wall mounts then you can have your mast above the top and also not be putting hardware at the top. Electric/phone companies won’t like that solution because it uses more vertical real estate, but if it’s just a light pole then it ought not be a problem. If you do want something heavy duty that won’t break the bank then look at the Site Pro version of the WM4: https://www.sitepro1.com/store/cart.php?m=product_list <https://www.sitepro1.com/store/cart.php?m=product_list&c=1218> &c=1218 https://valmont-sitepro1-cdn.s3.amazonaws.com/spec-sheet/HDWM04%20(Assembly).pdf I don’t know the thickness of the steel stock, but the Channel Master one weighs 1 pound and the Site Pro one weighs 6.8 pounds, so I’m sure it’s sufficiently burly for most equipment. -Adam From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > On Behalf Of Ken Hohhof Sent: Tuesday, February 20, 2024 10:52 AM To: af@af.afmug.com <mailto:af@af.afmug.com> Subject: Re: [AFMUG] Wood Pole Mount Or the ChannelMaster 4" offset wall mounts, we call them W brackets. ---- Original Message ---- From: "Josh Luthman" Sent: 2/20/2024 9:37:59 AM To: "AnimalFarm Microwave Users Group" Subject: Re: [AFMUG] Wood Pole Mount Just use a Jpole? Or an MTOW? On Tue, Feb 20, 2024 at 10:31?AM Matt <matt.mailingli...@gmail.com <mailto:matt.mailingli...@gmail.com> > wrote: I need to mount a small steel pole to a wood light pole. The kits I see online are like $300 range and way more robust than I need. Just mounting a small yagi a few feet above the top of the wood pole. Does anyone know of anything? -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com _____ -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com