That would make sense if there was a card edge connector involved. This is a ribbon cable and a 7 pin power connector.
I have some ideas for the next generation product that involves removable cards, but that isn't coming in the immediate future as there are other things which are higher on the priority list. On Wed, Jul 3, 2024, 5:16 PM <[email protected]> wrote: > Maybe some staggered lengths on fingers or contacts to correctly sequence > the power while inserting them? > > > > *From:* Forrest Christian (List Account) > *Sent:* Wednesday, July 3, 2024 4:47 PM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] Packetflux hot swap? > > Definitely not recommended. > > The bus is not designed for hot swapping. So while you might get away > with it, it isn't recommended. > > On Wed, Jul 3, 2024, 4:35 PM Seth Mattinen via AF <[email protected]> wrote: > >> Can I (very carefully) hot add or remove a packetflux rackinjector board >> on a running system? >> >> ~Seth >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > ------------------------------ > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
