Is it just me, or do you all see your replies twice? When I post, I see my post, then I see it come through again "via AF"
On Tue, Sep 23, 2014 at 9:22 AM, Kade Sullivan via Af <[email protected]> wrote: > All integrated SMs, all with KP Reflectors. > > On Tue, Sep 23, 2014 at 9:20 AM, Glen Waldrop via Af <[email protected]> wrote: > >> A & B hooked to the same polarity on each client? >> >> >> >> ----- Original Message ----- >> *From:* Kade Sullivan via Af <[email protected]> >> *To:* [email protected] >> *Sent:* Tuesday, September 23, 2014 9:10 AM >> *Subject:* [AFMUG] PMP450 3.65 Oddities >> >> So I have our second 450 3.65 AP up, and every single AP at this site >> is showing a ~10dbi gap between the 2 polarities on the Uplink side of >> things (from the SM's perspective). >> >> The strangest part is that the 10db gap seems to go back and forth >> between the A side being the stronger signal and the B side. It seems >> random, and I have included a shot of each of the link status pages on this >> AP. All these SMs are in the same general geographic area, within 10 >> degrees of each in relation to the AP. >> >> You can see the top SM here actually has the A side with a better signal, >> while the other 4 show a B side with the higher signal. What in the crap >> is going on here. Do we have a bad antenna on the AP? >> >> I can't seem to make any sense of this at all. All these SMs have the >> same KP reflector, and they have all been visited twice to ensure they are >> peaked. >> >> I'm at a loss here. >> >> Help me AFMUG! >> >> >
