No, our needs are much simpler but we saw similar issues on 5 routers from 750's to 1100's. Went back to 6.15 and haven't had a problem in 3 weeks.
Rory From: Af [mailto:[email protected]] On Behalf Of Chris Wright via Af Sent: Thursday, September 25, 2014 9:24 AM To: [email protected] Subject: Re: [AFMUG] CCR-1036 fun with PPPoE Rory, thanks for your reply. Is your setup fairly similar to ours? PPPoE, Accounting, and BGP all done by the Mikrotik? How many sessions do you have and what kind of throughput? Chris Wright Velociter Wireless <http://www.velociter.net/> From: Af [mailto:[email protected]] On Behalf Of Rory Conaway via Af Sent: Thursday, September 25, 2014 7:16 AM To: [email protected] Subject: Re: [AFMUG] CCR-1036 fun with PPPoE On the older routers, we went back to 6.15 and things have been rock solid. We saw similar problems with 6.19. Rory From: Af [mailto:[email protected]] On Behalf Of James Howard via Af Sent: Thursday, September 25, 2014 6:39 AM To: [email protected] Subject: Re: [AFMUG] CCR-1036 fun with PPPoE Have you tried taking down the BGP session on the Edge router for a couple minutes and then restart it? From: Af [mailto:[email protected]] On Behalf Of Chris Wright via Af Sent: Wednesday, September 24, 2014 5:37 PM To: [email protected] Subject: [AFMUG] CCR-1036 fun with PPPoE CCR-1036 running RouterOS 6.19 After some serious amounts of testing, we felt our CCR was ready to take the plunge. The core router talks BGP to our two Imagestream Edge routers and gets all 500k+ routes from each in about three minutes. Its PPPoE server manages to authenticate the bulk of nearly 1800 customers in four minutes. All's fine and dandy for about 12 hours, then not so fine and dandy things start happening. Overall traffic that should be near 600mbps seems to top off around 400mbps. Edge 1 goes unresponsive, VRRP doesn't kick in on Edge 2 and the entire network degrades. All devices on our public switch go partially unresponsive to pings including our DNS servers, other various VM's, and ESXi hosts themselves. Here's the fun part: We took the CCR out, just flat out unplugged it and turned on our old Core routers. They start authenticating customers but they're insanely slow in doing it. It's not until we reboot our Edge 1 router that things get back to normal and the old Core routers authenticate at acceptable speeds. Could the CCR be inducing a problem in our Edge routers perhaps? Chris Wright Velociter Wireless <http://www.velociter.net/> ________________________________ Total Control Panel Login <https://asp.reflexion.net/login?domain=litewire.net> To: [email protected] <https://asp.reflexion.net/address-properties?aID=242260993&domain=litew ire.net> From: 00000148a9cf7626-53a62885-89e0-4e1c-9c7f-b4d8519c55eb-000000@amazonses.c om <https://asp.reflexion.net/address-properties?aID=2633740531&domain=lite wire.net> Message Score: 2 High (60): Pass My Spam Blocking Level: High Medium (75): Pass Low (90): Pass Block <https://asp.reflexion.net/FooterAction?ver=2&bl-sender-address=1&rID=24 2260993&aID=2633740531&domain=litewire.net> this sender / Block <https://asp.reflexion.net/FooterAction?ver=2&ent=1&bl-sender-address=1&; rID=242260993&aID=2633740531&domain=litewire.net> this sender enterprise-wide Block <https://asp.reflexion.net/FooterAction?ver=2&bl-sender-domain=1&rID=242 260993&aID=2633740531&domain=litewire.net> amazonses.com / Block <https://asp.reflexion.net/FooterAction?ver=2&ent=1&bl-sender-domain=1&r ID=242260993&aID=2633740531&domain=litewire.net> amazonses.com enterprise-wide This message was delivered because the content filter score did not exceed your filter level.
