+1
Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: Friday, September 26, 2014 at 8:53 AM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [AFMUG] Cambium Newbie Question Strangely enough, I've had the opposite experience with reliability. I've had more mysterious deaths from sync injectors.....haven't had a CMM failure in years. You really prefer the CMM? I use to have tons of issues with CMMs losing sync, losing power, dying. It seems to me like the sync injectors are a fraction of the cost and are almost an 'install and forget it' type of product. They just keep on working. I actually prefer the cheaper version that Packetflux offers, having used both extensively. On Thu, Sep 25, 2014 at 12:54 PM, Adam Moffett via Af <[email protected]<mailto:[email protected]>> wrote: .....also the PMP100 SyncInjector from Packetflux ought to work with ePMP. You might want the gigE version, but in the real world with a mix of subscribers at different MCS levels I'm not sure how likely you are to exceed 100x100. The CMM4 is a much more rugged beast. It is expensive, but you are not likely to go back and wish you'd bought the cheap one. My plan is to hook up the internal GPS and have it available, but also to provide sync over power. Once you are using GPS sync to re-use channels it becomes critical that it's always working, so better to have two timing sources available IMO. They have built in GPS if youre on a budget, not sure why alot of people are so die hard against using it On Thu, Sep 25, 2014 at 12:56 PM, Jeremy Grip via Af <[email protected]<mailto:[email protected]>> wrote: I’m looking at ePMP w/channel reuse from a cost-comparison standpoint. Trying to figure out how much I need to spend on GPS synch for a 4 AP/ 2 channel cluster. Does it need to be a CMM4? I will want to be synching multiple POPs… Jeremy Grip North Branch Networks,LLC -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
