Did that help any?
I was thinking of this one:
/ip hotspot ip-binding
add address=192.168.1.0/24 type=bypassed disabled=no
replace 192.168.1.0/24 with the network where your unifi stuff lives
I have not tried this with UniFi in particular, but I do know that this
will allow that subnet to function without logging or seeing the splash
page. I've used it to allow management access to equipment, IP cameras,
etc. Without the bypass rule, no device can do anything unless it can
open a web browser and log in first.
This was one option I found.
/ip hotspot
set 0 address-pool=none
Rory
*From:*Af [mailto:[email protected]] *On Behalf Of *Adam Moffett via Af
*Sent:* Wednesday, October 01, 2014 8:44 AM
*To:* [email protected]
*Subject:* Re: [AFMUG] Mikrotik Hotspot interfering with AirControl
You need to add a hostpot bypass rule for the network that you don't
want subjected to the hotspot.
Can it be disabled?
On Wed, Oct 1, 2014 at 9:52 AM, Rory Conaway via Af <[email protected]
<mailto:[email protected]>> wrote:
Apparently Miktotik employs something called ARP poisoning as a
default. Just letting anyone know that might run into this.
Rory
*From:*Af [mailto:[email protected]
<mailto:[email protected]>] *On Behalf Of *Rory Conaway via Af
*Sent:* Tuesday, September 30, 2014 2:29 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] Mikrotik Hotspot interfering with AirControl
We are on the inside with our laptops on static IP addresses. It
kills the laptop from talking to the AP directly. Just trying to
figure out how that’s happening.
Rory
*From:*Af [mailto:[email protected]] *On Behalf Of *Jerry
Richardson (airCloud) via Af
*Sent:* Tuesday, September 30, 2014 1:38 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] Mikrotik Hotspot interfering with AirControl
I believe you will have to manipulate the firewall and walled garden
On Tue, Sep 30, 2014 at 11:07 AM, Rory Conaway via Af
<[email protected] <mailto:[email protected]>> wrote:
When we turn on the hotspot, AirControl goes offline and all the
APs are on a different subnet. We can’t even log into the APs.
Haven’t checked with WireShark yet but just wondering if this is
simply a setting or some function of the software?
Rory Conaway
Triad Wireless
4226 S. 37th Street
Phoenix, Az. 85040
602-426-0542 <tel:602-426-0542>
[email protected] <mailto:[email protected]>
www.triadwireless.net <http://www.triadwireless.net>
