And then it just magically "works" somehow? No definition of which one is slave and master etc. ?
From: Af [mailto:[email protected]] On Behalf Of George Skorup (Cyber Broadcasting) via Af Sent: Monday, October 06, 2014 4:54 PM To: [email protected] Subject: Re: [AFMUG] how to use (2) CMM Micro and one GPS antenna ?? IIRC, it needs to be a roll-over cable. Pin 1 to 6 and 2 to 3. 2 & 3 if you care about the GPS data, otherwise just 1 to 6 and 6 to 1. On 10/6/2014 3:48 PM, Paul McCall via Af wrote: I have to hook up a CMM to a tower that already has a CMM on it, like today.�� There is a �timing� 6 pin connector on the CMM.� Can that be used to bridge the sync to the 2nd CMM?� If so, how would that be wired, and what setting would I make in the CMM(s) so that it would know to use it � Paul � Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com<http://www.pdmnet.com/> [email protected]<mailto:[email protected]> �
