Hi, There is no SNMP support to push the "Default Frequencies" button, yet. Like Joe pointed out, the OIDs below will allow you to populate the list with a single set command. Also, all new radios out of the box will have the default list populated (or when you factory default them). Please let us know if that is not the case.
Thanks, Sriram -----Original Message----- From: Af [mailto:[email protected]] On Behalf Of Joe Cracchiolo via Af Sent: Tuesday, October 07, 2014 12:20 PM To: [email protected] Subject: Re: [AFMUG] 450 3.65 SNMP Default Frequencies There is a pair of new MIB's for that, WHISP-BOX-MIBV2-MIB::addCustomFreqList.0 and WHISP-BOX-MIBV2-MIB::removeCustomFreqList.0 in v13.2 b32. I haven't tried that on MIB value yet to see how well it works. You can also use a curl command to program frequencies in the older firmware. Joe On Oct 7, 2014, at 10:01, Matt via Af <[email protected]> wrote: > Programming 450 3.65 SM's. See a new button under 'Custom > Frequencies' called 'Default Frequencies'. Anyway to push that button > with SNMP?
