That sounds about right. Open an account at a place like Graybar, even if you pay with a credit card.
From: Darin Steffl via Af Sent: Wednesday, October 08, 2014 5:00 PM To: [email protected] Subject: Re: [AFMUG] Support bracket for RocketDish 34db 3 foot dish What are you guys paying for 2inch imc conduit? Found some for $29 for 10 foot while rigid is $42 for the same. On Tuesday, October 7, 2014, Jeremy via Af <[email protected]> wrote: IMC is all we use. Have saved a ton of cash since we discovered IMC. On Tue, Oct 7, 2014 at 7:59 PM, Ken Hohhof via Af <javascript:_e(%7B%7D,'cvml','[email protected]');> wrote: IMC conduit weighs about half as much as rigid pipe and is equally strong or stronger due to the work hardening. Any electrical supply house will have it. But it is harder than rigid pipe so mounting clamps may not dig in very well. From: Mike Hammett via Af Sent: Tuesday, October 07, 2014 8:50 PM To: javascript:_e(%7B%7D,'cvml','[email protected]'); Subject: Re: [AFMUG] Support bracket for RocketDish 34db 3 foot dish I get tower pipe from Primus because it's local... otherwise the biggest pipe Menards has that fits in the mount. ;-) I have a bunch of 2-7/8" sections waiting for a home because they wouldn't fit in the Force 100's mounts. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ---------------------------------------------------------------------------- From: "Darin Steffl via Af" <javascript:_e(%7B%7D,'cvml','[email protected]');> To: javascript:_e(%7B%7D,'cvml','[email protected]'); Sent: Tuesday, October 7, 2014 5:10:57 PM Subject: Re: [AFMUG] Support bracket for RocketDish 34db 3 foot dish Where do you buy your pipe at? Right now we're just getting at Menards but their heavy duty stuff is really expensive. We buy the thin-wall emt but for these we would like stronger pipe but seeing if there's a cheaper place than the big box stores like Home Depot and Menards. On Tue, Oct 7, 2014 at 5:06 PM, Josh Reynolds via Af <javascript:_e(%7B%7D,'cvml','[email protected]');> wrote: edit: 2" pipe is fine as long as it isn't like, thinwall-emt or something Josh Reynolds, Chief Information Officer SPITwSPOTS, www.spitwspots.com On 10/07/2014 02:04 PM, Josh Reynolds via Af wrote: 2" pipe is fine unless you expect 150MPH winds, which the gear itself isn't rated for anyway. Josh Reynolds, Chief Information Officer SPITwSPOTS, www.spitwspots.com On 10/07/2014 02:00 PM, Darin Steffl via Af wrote: Hey guys, Is there a way or do you recommend adding a support brace to the RocketDish 34db 3 foot dish at all? We haven't used them before but we got some for a 20-mile link and we're adding RF Armor as well so they're quite heavy. What are your recommendations for a mount for these and any additional bracing to make sure they don't blow back and forth. Is a 2" pipe enough for the bracket on these? Thanks -- Darin Steffl Minnesota WiFi www.mnwifi.com 507-634-WiFi Like us on Facebook -- Darin Steffl Minnesota WiFi www.mnwifi.com 507-634-WiFi Like us on Facebook -- Darin Steffl Minnesota WiFi www.mnwifi.com 507-634-WiFi Like us on Facebook
