Thanks for the tip. This is only a 10 sm ap all on 13.1.3 and they all reconnected fine but I have some 80 sm 2.4 ap's where I will do sm's first.
Sent while mobile > On Oct 11, 2014, at 5:19 PM, Mark Radabaugh via Af <[email protected]> wrote: > > I have been running it on a number of AP's for a while (well.. various builds > anyway). > > One caution - get everything to 13.1.3, then upgrade the SM's followed by the > AP's. CNUT will let you update the SM's from the AP without upgrading the > AP first. > > I was having trouble getting a small subset of SM's reconnected when the AP's > were on 13.2 with SM's on 13.1 or prior. > > Mark > >> On 10/11/14, 8:10 PM, Ryan Ray via Af wrote: >> Just ran an update to one of my 3.65 450 AP's and did an SM connected to it. >> >> SM is running at a -68.5 28 / 30 SNR and before the software update I would >> get about 23Mb/s down, 12 up. After the update... 43Mb/s down, 16Mb/s up. >> 80% downlink set on the AP. >> >> Thanks muchly Cambium. I'm a happy duck as long as there's no adverse >> affects that haven't been found yet. >> >> > > > -- > Mark Radabaugh > Amplex > > [email protected] 419.837.5015 x 1021 >
