You've got your hop time and hello count.
Hello needs to be roughly 1/100th of your hop count, but anything
shorter than 30/3000 will often have issues. Yes, the radio will hop
every period, ideally to the channels that aren't on the "naughty" list.
Josh Reynolds, Chief Information Officer
SPITwSPOTS, www.spitwspots.com <http://www.spitwspots.com>
On 10/14/2014 07:36 AM, That One Guy via Af wrote:
5.5.8
Im leery of a week old UBNT load. I put it on one backhaul and had an
issue with it getting power from a toughswitch, but havent had a
chance to see if it is one off or can be replicated.
I dont care if I can define the hops or not, it shouldnt be hopping
every single hopping period as far as I know, if theyre trying to
mimic FHSS then the hopping sequence needs to be randomized and much
much quicker
On Tue, Oct 14, 2014 at 5:19 AM, timothy steele via Af <[email protected]
<mailto:[email protected]>> wrote:
Are you using 5.5.10? The frequency hope supposed to be user defined
—
Sent from Mailbox <https://www.dropbox.com/mailbox>
On Mon, Oct 13, 2014 at 11:53 PM, That One Guy via Af
<[email protected] <mailto:[email protected]>> wrote:
.
i tried this a long time ago, it just hopped constantly
so i figured after a couple years they must have gotten it to
work, so I turned it on on a 5ghz backhaul and selected the
default list.
Its hopping like once every second, does it go through a
series of hops before it stabilizes or is it still UBNT
unicorn sausage?
--
All parts should go together without forcing. You must
remember that the parts you are reassembling were disassembled
by you. Therefore, if you can't get them together again, there
must be a reason. By all means, do not use a hammer. -- IBM
maintenance manual, 1925
--
All parts should go together without forcing. You must remember that
the parts you are reassembling were disassembled by you. Therefore, if
you can't get them together again, there must be a reason. By all
means, do not use a hammer. -- IBM maintenance manual, 1925
