Most of them have chutes, some are just blades with a trailing eye. Don't get that kind, make sure you get the chute. The DW Dealer near you will know what to order. They are not that expensive, so buying from the dealer is ok. You should be paying <$750 in my opinion.
http://www.ditchwitch.com/parts-service/digging-systems/plow-blade Regards, Chuck On Thu, Oct 16, 2014 at 11:47 AM, Chuck McCown via Af <[email protected]> wrote: > Yes, welded to the back of the blade as I recall. The larger blades has a > chute that floats a bit independent from the blade but smaller blades have > the chute built in I think. They all have chutes. > > -----Original Message----- From: Matt via Af > Sent: Thursday, October 16, 2014 9:44 AM > To: [email protected] > Subject: Re: [AFMUG] Ditch Witch 410 SX > > Does the blade have a cable chute? Do you have a link to the blade? > > > On Thu, Oct 16, 2014 at 10:16 AM, Chuck Hogg via Af <[email protected]> wrote: > >> 18-24" blades are typical for this machine, I have one and we have a 24" >> blade. >> >> Regards, >> Chuck >> >> On Wed, Oct 15, 2014 at 9:33 PM, Chris Fabien via Af <[email protected]> >> wrote: >> >>> >>> We use a case maxi sneaker with a 2ft chute blade to do fiber drops. Very >>> nice machine. >>> >>> On Oct 15, 2014 6:53 PM, "Matt via Af" <[email protected]> wrote: >>> >>>> >>>> With a 410 SX what blade is everyone using to do cat-5 and fiber drops? >>>> >>> >> >> >
