*nods* everyone was all excited about a commissioner going to the WISPA show. 
Part-15 had the chairman. It could be differences of personal character, but 
Part-15 did a lot before WISPA did. 




----- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 



----- Original Message -----

From: "Chuck McCown via Af" <[email protected]> 
To: [email protected] 
Sent: Thursday, October 23, 2014 10:47:42 AM 
Subject: Re: [AFMUG] Rocket M5 and 5.2 band? 




Not really. Part-15 had the ear of the commission too in the early days. Now 
WISPA has stepped that game up a bit. But WISPA is small potatoes compared to 
the cell companies and cable companies and NAB and all the other lobby groups 
that all want to carve up the spectrum for their own purposes. I honestly think 
the FCC OET likes us and roots for us when they are given a chance. I have 
personally participated in ex parte meetings with them. They like what we do 
and how we do it. 




From: That One Guy via Af 
Sent: Thursday, October 23, 2014 9:36 AM 
To: [email protected] 
Subject: Re: [AFMUG] Rocket M5 and 5.2 band? 


It never ceases to amaze me... deflection 


On Thu, Oct 23, 2014 at 10:31 AM, Mike Hammett via Af < [email protected] > wrote: 




If WISPA wasn't credible, would a commissioner keynote their annual banquet? 

If WISPA wasn't credible, would we have seen the new 5 GHz spectrum, retained 
use of large antenna, soon more spectrum in 3.5, better tower rules, etc.? 

Would we have seen all of the proposed changes to our benefit in the last NPRM? 




----- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 





From: "That One Guy via Af" < [email protected] > 
To: [email protected] 
Sent: Thursday, October 23, 2014 10:27:42 AM 


Subject: Re: [AFMUG] Rocket M5 and 5.2 band? 


we are a WISPA member last I knew. But yes, credibility with regulators. When 
you sit down and sya "hey! FCC, we dont like these new requirements. Change 
them" they giggle because they know the industry you represent isnt following 
the current guidelines, so catering to them really isnt top on their list of to 
dos. This industry has an attitude of "if we arent getting caught, we arent 
doing it" 
UBNt wont change anything because theyre called out, they have to be forced by 
the FCC or other regulating agencies to comply, historically speaking I men, in 
fantasy pants land (cool parachute fantasy pants with plenty of zippers) they 
might proactively comply, but in real world, theyll meh it because they saw 
what happenned to sales 


On Thu, Oct 23, 2014 at 10:07 AM, Mike Hammett via Af < [email protected] > wrote: 

<blockquote>


I think the credibility with regulators is greatly increasing. 

Shame on anyone on this list that is not a WISPA member. SHAME. ON. YOU. 




----- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 





From: "Adam Moffett via Af" < [email protected] > 
To: [email protected] 
Sent: Thursday, October 23, 2014 10:05:53 AM 


Subject: Re: [AFMUG] Rocket M5 and 5.2 band? 

Sub "teeth" perhaps for "credibility with regulators", or similar. 


<blockquote>



What “teeth” do you expect WISPA to have? 




From: That One Guy via Af 
Sent: Thursday, October 23, 2014 9:31 AM 
To: [email protected] 
Subject: Re: [AFMUG] Rocket M5 and 5.2 band? 


Non UBNT fanboys would agree that UBNT is the most abused set of systems we 
use, note the dismay over losing "test mode" or whatever its called and the 
backlash I got for snitching on a vendor who was selling non US radios to US 
customers. UBNT wants to market themselves a a big player, but they cant even 
get the systems to do simple if and or 
for the most part in my experience of dealing with mikrotik guys, they take 
their spectrum stewardship seriously, Ive not dealt with all the tik guys, 
there are probably alot who abuse it too, and shame on them for that, but tik 
isnt as prevalent in the industry as UBNT is. 
I personally dont like the temptation to cheat, we are changing out a rocket 
link with a 650 right now that would work fine at full power in the lower 5gz, 
and I would never get caught, instead we are shedding customers while we are 
putting up the replacement tommorrow. Most folks wold just cheat it to get 
through, thats why WISPA has no real teeth 


On Thu, Oct 23, 2014 at 7:34 AM, Mike Hammett via Af < [email protected] > wrote: 

<blockquote>


I don't believe the FCC has issued any DFS related violations that didn't 
include interfering with TDWR. It seems like as long as you don't interfere 
with TDWR, no one cares. 




----- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 





From: "That One Guy via Af" < [email protected] > 
To: [email protected] 
Sent: Wednesday, October 22, 2014 10:48:31 PM 


Subject: Re: [AFMUG] Rocket M5 and 5.2 band? 


it only sets in the ap if you select a channel, if you give it a list it stays 
at full power. I wish WISPA would realize that they have absolutely no teeth 
and our membership dues have no return until our industry takes stewardship of 
the spectrum seriously. Its things like this that ensure the 5ghz rules are 
here to stay, WISPA has a better chance of sticking a straw up a unicorns hind 
end and blowing rainbow bubbles out its nose than getting the rules changed. 


On Wed, Oct 22, 2014 at 10:18 PM, Mathew Howard via Af < [email protected] > wrote: 

<blockquote>



That really bothers me too... the AP side will limit it to the legal limit 
(assuming you have the antenna size set properly), but the clients do not... 
I'm guessing there are an awful lot of NanoBridges out there running at 23dBm 
Tx power on DFS channels - which should be limited to 5dBm. 

UBNT really needs to fix that. 




From: Af [ [email protected] ] on behalf of That One Guy via Af [ 
[email protected] ] 
Sent: Wednesday, October 22, 2014 2:34 PM 
To: [email protected] 
Subject: Re: [AFMUG] Rocket M5 and 5.2 band? 



I dont like that theyre not limiting power in those bands automatically, I 
thought they were supposed to 




On Wed, Oct 22, 2014 at 2:17 PM, Jason McKemie via Af < [email protected] > wrote: 

<blockquote>

I didn't know the 5GHz Power Bridges ever had the ability to go that low 
(legally). 


On Wed, Oct 22, 2014 at 1:44 PM, Heith Petersen via Af < [email protected] > wrote: 

<blockquote>



I assume that this does not apply to the Power Bridges. I am scared to update 
the few that are running 5.2 on older firmware to find out ;) 



From: Af [mailto: [email protected] ] On Behalf Of Bill Prince via Af 
Sent: Wednesday, October 22, 2014 1:33 PM 
To: [email protected] 
Subject: Re: [AFMUG] Rocket M5 and 5.2 band? 


Go to the UBNT web site. You have to register & they will send you stickers and 
an activation key that you enter on the System tab in the GUI. 


bp 
On 10/22/2014 9:51 AM, Sam Lambie via Af wrote: 
<blockquote>


Where the heck would one get an update key and how do you enter it into the 
radio? These radios are about 3 years old. This particular one worked just fine 
on Firmware 5.3 in 5.2... 



On Wed, Oct 22, 2014 at 10:49 AM, Glen Waldrop via Af < [email protected] > wrote: 


I don't know. I've got ~9 Nanobridge M5 out there feeding towers on short hops, 
all listed UNII1 and half the links are running it. 

Is this possibly an older unit before the UNII 2 band was enabled from factory? 
I wonder if the update key has to be entered to access UNII 1. 






<blockquote>


----- Original Message ----- 

From: Sam Lambie via Af 

To: [email protected] 

Sent: Wednesday, October 22, 2014 11:46 AM 

Subject: Re: [AFMUG] Rocket M5 and 5.2 band? 



Ok, I have a radio on the bench with 5.5.10 loaded and all I see is the 5.8 
band in AP mode. what am I missing? 



On Wed, Oct 22, 2014 at 10:34 AM, Glen Waldrop via Af < [email protected] > wrote 


<blockquote>



Works quite nicely. I've got a few out there. Nice to have 500+ MHz between 
feeds. 




<blockquote>


----- Original Message ----- 

From: Mike Hammett via Af 

To: [email protected] 



Sent: Wednesday, October 22, 2014 11:32 AM 

Subject: Re: [AFMUG] Rocket M5 and 5.2 band? 



Firmware 5.5.10 (actually, one of its betas was the first to offer it). 



----- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 

Image
                                                          removed by
                                                          sender.Image
                                                          removed by
                                                          sender.Image
                                                          removed by
                                                          sender.Image
                                                          removed by
                                                          sender.









From: "Sam Lambie via Af" < [email protected] > 
To: [email protected] 
Sent: Wednesday, October 22, 2014 11:30:14 AM 
Subject: [AFMUG] Rocket M5 and 5.2 band? 


I heard somewhere at WISPApalooza that the M series does 5.2 band now? Is that 
smoke and mirrors? 
Sam 




-- 
-- 
Sam Lambie 
Taosnet Wireless Tech. 
575-758-7598 Office 
www.Taosnet.com 



</blockquote>










-- 
-- 
Sam Lambie 
Taosnet Wireless Tech. 
575-758-7598 Office 
www.Taosnet.com 
</blockquote>








-- 
-- 
Sam Lambie 
Taosnet Wireless Tech. 
575-758-7598 Office 
www.Taosnet.com 
</blockquote>


</blockquote>


</blockquote>



-- 

All parts should go together without forcing. You must remember that the parts 
you are reassembling were disassembled by you. Therefore, if you can't get them 
together again, there must be a reason. By all means, do not use a hammer. -- 
IBM maintenance manual, 1925 

</blockquote>



-- 

All parts should go together without forcing. You must remember that the parts 
you are reassembling were disassembled by you. Therefore, if you can't get them 
together again, there must be a reason. By all means, do not use a hammer. -- 
IBM maintenance manual, 1925 


</blockquote>



-- 

All parts should go together without forcing. You must remember that the parts 
you are reassembling were disassembled by you. Therefore, if you can't get them 
together again, there must be a reason. By all means, do not use a hammer. -- 
IBM maintenance manual, 1925 

</blockquote>



</blockquote>



-- 

All parts should go together without forcing. You must remember that the parts 
you are reassembling were disassembled by you. Therefore, if you can't get them 
together again, there must be a reason. By all means, do not use a hammer. -- 
IBM maintenance manual, 1925 


</blockquote>



-- 

All parts should go together without forcing. You must remember that the parts 
you are reassembling were disassembled by you. Therefore, if you can't get them 
together again, there must be a reason. By all means, do not use a hammer. -- 
IBM maintenance manual, 1925 

Reply via email to