Not exactly, the antenna cables go through the big hole at the top and the four holes around it are for attaching a cover that goes over the top of the radio. The actual radio is held on with a hook at the top and a screw at the bottom... it makes more sense if you're familiar with how the ePMP radios mount.
________________________________ From: Af [[email protected]] on behalf of Ty Featherling via Af [[email protected]] Sent: Tuesday, October 28, 2014 1:13 PM To: [email protected] Subject: Re: [AFMUG] PTP450 + Epmp100 dish _ Mtow Ok okay so that circle with the 4 holes around it at the top maybe? If so that's not so bad. -Ty On Tue, Oct 28, 2014 at 1:11 PM, Mathew Howard via Af <[email protected]<mailto:[email protected]>> wrote: They are setup for an ePMP radio to attach to the plate on the non-mount side, it's just not designed for a 450... looks like it worked fine to do it that way though. ________________________________ From: Af [[email protected]<mailto:[email protected]>] on behalf of Ty Featherling via Af [[email protected]<mailto:[email protected]>] Sent: Tuesday, October 28, 2014 1:01 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] PTP450 + Epmp100 dish _ Mtow Is that mount serious? I mean it may be convenient to mount on the other side but c'mon. Any no place for the radio? Could have at least made a nice spot on there for a radio on one of those plates so that you can put the radio on the non-mount side. Weird. -Ty On Tue, Oct 28, 2014 at 12:56 PM, Gino Villarini via Af <[email protected]<mailto:[email protected]>> wrote: Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com<http://www.aeronetpr.com> @aeronetpr
