I believe my VLAN issue with software release 2.3 maybe with a Mikrotik
Software/Hardware release rather than the ePMP software release. Below
is why I believe so.
1. New Hardware at this test site (using a RB850Gx2 with software
release 6.20).
2. Today I was able to get the same symptom with the 2.2 software
release that I previously had no issues with.
3. I updated the RB850Gx2 to software release 6.21.1 and the issue went
away (That was without rebooting the ePMP AP).
I am going to continue to monitor this test site and see if the issue
reappears. Because the issue went away after installing the latest
software on the router board, I am strongly considering the issue to be
a Mikrotik one.
Gilbert
On 11/3/2014 9:54 AM, Gilbert T. Gutierrez, Jr. via Af wrote:
Case #SC16220
Gilbert
On 11/3/2014 9:35 AM, Sriram Chaturvedi via Af wrote:
Gilbert,
Do you have the support case number handy? I will follow up
internally on this issue and get back to you.
Thanks,
Sriram
*From:*Af [mailto:[email protected]] *On Behalf Of *Gilbert T.
Gutierrez, Jr. via Af
*Sent:* Monday, November 03, 2014 10:09 AM
*To:* [email protected]
*Subject:* Re: [AFMUG] ePMP Software 2.3
I would suggest against 2.3 if you are utilizing VLANs. I discovered
a bug and have a ticket with Cambium where I was able to reproduce
the bug with them watching. I use VLANs. With a management VLAN and
2.3, I lost all web access to the AP radios. I had limited SSH
access. Through SSH, I was able to disable the management VLAN and
gain access through the web interface.
Gilbert
On 11/3/2014 5:43 AM, Mike Hammett via Af wrote:
Has anyone else tried 2.3 yet? Support is directing me to install
it, but this is the only 2.3 report I've seen... and not overly
optimistic.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
<https://www.facebook.com/ICSIL><https://plus.google.com/+IntelligentComputingSolutionsDeKalb><https://www.linkedin.com/company/intelligent-computing-solutions><https://twitter.com/ICSIL>
------------------------------------------------------------------------
*From: *"Gilbert T. Gutierrez, Jr. via Af" <[email protected]>
<mailto:[email protected]>
*To: *[email protected] <mailto:[email protected]>
*Sent: *Friday, October 31, 2014 7:42:15 PM
*Subject: *[AFMUG] ePMP Software 2.3
I was just deploying 2 sectors after successful tests and went
ahead and
updated them with 2.3. Big mistake! I can no longer access them
through
the web browser. I can SSH briefly to them before that session
locks up.
I was wondering if anyone knows how to revert them to the previous
software via the command line (They have 2 software banks)? The only
thing I have figured out is how to reboot them because the
session will
not stay up. CNUT will also not work to re-upload 2.2 (hung
uploading
image).
Gilbert
