Our feed system is TeamViewer. No cost. The dryer system is that thing with the Cisco you mentioned before. No cost there either.
----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ----- Original Message ----- From: "Ken Hohhof via Af" <[email protected]> To: [email protected] Sent: Friday, September 19, 2014 7:55:28 AM Subject: Re: [AFMUG] PC Remote control client for IPhone I have some customers doing that via Team Viewer, that seems to be the method of choice that the grain drier and feed mill companies set them up with. Not sure if that’s because it works the best, or is just the easiest for them to monetize (I’m assuming there’s a charge for the service, perhaps not). From what the farmers say, it works. Some grain drier controls companies have their own servers that VPN to the drier and then let the farmer remote in. For example: http://mathewscompany.com/products/controlsmonitoring/m-c-trax/ We hooked up one of these to a new drier recently but the farmer hasn’t fired it up yet. From: Darin Steffl via Af Sent: Friday, September 19, 2014 12:41 AM To: [email protected] Subject: Re: [AFMUG] PC Remote control client for IPhone TeamViewer works the best. Much better performance than logmein On Sep 19, 2014 12:04 AM, "That One Guy via Af" < [email protected] > wrote: the two people i know using the logmein app swear by it, its dirt cheap too On Fri, Sep 19, 2014 at 12:01 AM, Nate Burke via Af < [email protected] > wrote: <blockquote> I have a customer (non Technical Farmer) who needs to be able to remote control a PC from his IPhone to view/control his Grain Drier. What's out there that's easy to use/setup, and is compatible with an IPhone. He will be logging into a PC. Modest cost won't be an issue if it will work well. Nate -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925 </blockquote>
