The makers of PRTG have a freeware tool that I have sometimes found helpful:
http://www.paessler.com/tools/snmptester
-----Original Message-----
From: Bill Prince via Af
Sent: Tuesday, November 04, 2014 11:06 AM
To: Motorola III
Subject: [AFMUG] UBNT: fails to respond to SNMP?
This seems to be the week for weird shit problems. We have a new
installation at a remote site using a UBNT nanobeam. When we went to
add the new CPE to our cacti system, we got a timeout on the SNMP query.
No problem, probably something wrong with the SNMP settings. Nope, they
are exactly as needed (configuration comes from a template anyway, so
what could have gone wrong?).
Well, the nanobeam was from inventory, so it was running a down-rev
version of AirOS (5.5.6). So I upgraded it to 5.5.10. No change.
I then ran a trace from the local POP router. The SNMP requests are
most definitely going to the radio, just no response.
So I quadruple-checked the SNMP settings. All OK.
No firewall is running on the radio.
ssh'd into the radio, and the tinysnmpd is running with the correct
parameters.
"block management access" is NOT checked.
What in the world am I missing?
--
bp
