The cabling may play a role... On Fri, Nov 7, 2014 at 3:54 PM, George Skorup (Cyber Broadcasting) via Af < af@afmug.com> wrote:
> Well, I can't get it to happen on either the Zyxel or Netgear managed > switches I have. Nor on the MT CCR running in the server room right now > (which has two AF24's and one AF5 links running live on it and the errors > appear here and at the routers on the other ends). > > BUT.. this is a single spare unit running on the bench, no RF link up. > Which I have no way around because, 1) I don't have another unit, and 2) > it's indoors and AF24's no likey that anyway. > > On 11/7/2014 2:10 PM, Chuck Macenski via Af wrote: > > If you run into any issues, hit me ( ch...@ubnt.com ) and we will figure > it out. > > Chuck > > On Fri, Nov 7, 2014 at 12:34 PM, George Skorup (Cyber Broadcasting) via Af > <af@afmug.com> wrote: > >> FWIW, the AF firmware has been pretty stable, even betas. I had to run >> 2.2-beta3 on the AF5s since it has DFS/RADAR improvements. I've had a 3.4 >> mile link up running DFS band for a couple weeks and it has been pretty >> stable pushing about 100Mbps. I would kill for a 5.1-5.3GHz AF5. >> >> Anyway... since Chuck seems to think it's MikroTik, I will pull out a >> spare AF24 and see if I get errors on either of my two managed switches in >> the office. >> >> On 11/7/2014 11:05 AM, Bill Prince via Af wrote: >> >> I wouldn't call it "issues", as I almost never do the Tools->Discovery. >> I only went through that process after I read this from George. >> >> The interface FCS error counter is zero (or near zero), and each time I >> did Tools->Discovery, the FCS counter would increment by between 5 and 15. >> Our AF24s are otherwise working fine. >> >> We upgraded to 1.5 to get SNMP, and haven't had the need to upgrade >> beyond that. George tends to operate a bit closer to the bleeding edge than >> I'm comfortable with. >> >> bp >> <part-15@SkylineBroadbandService> >> >> >> >> On 11/7/2014 8:44 AM, Chuck Macenski via Af wrote: >> >> You also have issues when connected to Microtik? >> >> On Fri, Nov 7, 2014 at 9:58 AM, Bill Prince via Af <af@afmug.com> wrote: >> >>> Same thing happens on version 1.5. >>> >>> bp >>> >>> >>> On 11/6/2014 2:59 PM, George Skorup (Cyber Broadcasting) via Af wrote: >>> >>>> Found this interesting. I have some AF24's on 2.0 and AF5's on >>>> 2.2-beta3. They work fine. If I do a Tools > Discovery, the MT ethernet >>>> counters on both sides will increment FCS and Code errors. Same thing >>>> happens if I run some pings between the radios (not router to router, radio >>>> to radio). I'm guessing this because of the switching method the AF's use >>>> (cut-through?). >>>> >>>> >>> >> >> >> > >
