Anyone know the component to replace to fix this? Have replaced ethernet controller chips and diodes on P9 units.
On Wed, Nov 12, 2014 at 9:07 PM, Ken Hohhof via Af <[email protected]> wrote: > I had one do that, Paul at PDMNet said it was a hardware problem and > apparently somewhat common, I sent it in and they fixed it. It was a pretty > old SM and I thought it was just crud or water in the jack or on the PCB but > I cleaned it up really good with alcohol with no success. > > From: Steve D via Af > Sent: Wednesday, November 12, 2014 9:02 PM > To: af > Subject: [AFMUG] Phantom Default Plug? > > I know I've seen this before, but just had an FSK 2.4 SM do this to me - > real bugger too because it was the last in my truck while I was out doing a > site test. > > Any ideas what caused it or how to fix it? I think I was in the process of > changing color codes when it happened. It's just my truck test unit running > 11.2 firmware. Going to 13.1.3 didn't fix, nor did going back to 10.5. Put > in a real default plug and reset to defaults too. > > -Steve D
