#!/sbin/cgi
<?
include("lib/settings.inc");
if ($action!="test") {
if ($feature_poe_passthrough == 1) {
if (!isset($poe_test)) {
$poe_test="on";
}
}
if (!isset($stress_test)) {
$stress_test="on";
}
}
if (!isset($poe_cnt)) {
$poe_cnt="10";
}
if (!isset($stress_dur)) {
$stress_dur="5";
}
POE related. There is no temp sensor in UBNT gear.
On 11/18/2014 08:00 AM, That One Guy via Af wrote:
anybody know what this does?
I have an AP that has 6 clients, 5hz channels, decent links for all,
the AP is reachable fine, but the clients are all having throughput
problems and most of the time are inaccessible
Im wondering if the AP hasnt gotten too cold so Ive been trying to
force it to heat up, running the builtin speedtest to the colocated AP
browsing the /usr/www folder there is the test.cgi and the test2.cgi,
test2 lets you initiate a stress test, I dont know what that does, but
top shows the processor in heavy use. I assume this would generate heat.
Does ubnt have any temp sensor?
what does this stress test actually do?
I do not want to climb up and replace this AP today, I left my heavy
pants at home
--
All parts should go together without forcing. You must remember that
the parts you are reassembling were disassembled by you. Therefore, if
you can't get them together again, there must be a reason. By all
means, do not use a hammer. -- IBM maintenance manual, 1925
--
josh reynolds :: chief information officer
spitwspots :: www.spitwspots.com
