I just called Cambium. The SM will not scan in the 5.4 band if all of the 5.8 and 5.4 band is selected to scan. Once I turned off/deselected the 5.8 band, it worked. Cambium said that they have seen a few other cases like this and are in the process of fixing it.
On Tue, Nov 25, 2014 at 12:18 PM, Bill Prince via Af <[email protected]> wrote: > Are half-channels involved? Like frequency centers on 2.5 MHz spacing? > Depending on what version you're upgrading from, you may lose those half > channels. > > -- > bp > <part {dash} 15 {at} SkylineBroadbandService {dot} com> > > > On 11/25/2014 11:05 AM, Sam Lambie via Af wrote: > > I have attempting to set up a new box of 450 PTP. I can get the radios > to link up no problem in the 5.8 band. But for the life of me I can't get > it to do anything in 5.4! > They are both at 13.2 official. > The Slave sees the master in the BH Eval tab at -47 in both frequencies. > ] > Are these radios ready to work in 5.4? Or is there something that cripples > them? > Driving me fricking crazy! > sam > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > > > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
