Yeah, I am always behind on my canopy firmware updates, so when I could access the radios I got them up to a more current firmware and all the same. Its funny when I did that 2 days ago I had full access to all radios until the evening hit. Right now I am experiencing the issue with little activity going on now. Most users are residential
Heith From: Af [mailto:[email protected]] On Behalf Of Josh Luthman via Af Sent: Wednesday, November 26, 2014 8:50 AM To: [email protected] Subject: Re: [AFMUG] Bad AP Maybe Can you undo your change to see if it is maybe a bug in the firmware? Tried updating it? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Nov 26, 2014 at 9:48 AM, Heith Petersen via Af <[email protected]> wrote: I have an issue I have been dealing with for a few days. I have a Canopy 100 2.4 AP with 40 subs. Wireless is all good, tests work fine, no re-regs & jitter great. I initially thought I had 1 bad radio mucking the AP, which I have had in the past, but rarely. After segregating the subs to different color codes, I had the issue on several color codes with only a few customers associated to the AP. At times really no one would have service. At times some would have fantastic pings while others were 1000ms pings. I am assuming the AP is bad, but I wanted to check to see if I was missing something. The tower is pretty crappy and it’s really not safe to climb today. I have never had an AP fail like this, usually they were either blown or were sending or receiving crap signal Thanks Heith
