Yeah, it is Radiowaves. hopefully they will "fix" the issue since they were
the ones that shipped directly to us.

On Fri, Dec 5, 2014 at 10:04 AM, Bill Prince via Af <[email protected]> wrote:

>  We will all have to walk out to infinity to check that.
>
> --
> bp
> <part {dash} 15 {at} SkylineBroadbandService {dot} com>
>
>
> On 12/5/2014 8:46 AM, Chuck McCown via Af wrote:
>
>  I think I am correct, at infinity all parabolas are the same  with the
> two sides becoming parallel (it is a limit).  But not totally sure if,  at
> infinity, different focal length parabola are scale models of  others.
> That may take some thinking.  Is a parabola a self scaling curve?
>
>  *From:* Chuck McCown <[email protected]>
> *Sent:* Friday, December 05, 2014 9:43 AM
> *To:* [email protected]
> *Subject:* Re: [AFMUG] 11 ghz dish, can one put an 18ghz feed horn in it?
>
>   Depends on the manufacturer of the dish.
> Parabolic curves are all the same.  Just zoomed in or out on the curve.
> They all  use a  different part of the curve.  And they all have different
> focal points.
>
>  *From:* Sam Lambie via Af <[email protected]>
> *Sent:* Friday, December 05, 2014 9:09 AM
> *To:* [email protected]
> *Subject:* [AFMUG] 11 ghz dish, can one put an 18ghz feed horn in it?
>
>   I was shipped the wrong antennas (2 foot) for an 18ghz link, I didn't
> notice that it was an 11 ghz antenna set until I tried to get the radios to
> link up. Best I could get was -65. It drove me crazy trying to see if I was
> on a side lobe for half an hour until it got dark and I gave up. Right
> before I left, I glanced at the label and saw that the antenna was for an
> 11 ghz link.
>  So the question is, are the parabolics on the antenna the same and the
> feed horn different? Can it be swapped out to get me the -38 that I want,
> or are we going to have to uninstall the whole shebang?
>
>
>  Sam
>
> --
> --
> *Sam Lambie*
> Taosnet Wireless Tech.
> 575-758-7598 Office
> www.Taosnet.com <http://www.newmex.com>
>
>
>


-- 
-- 
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com <http://www.newmex.com>

Reply via email to