Dear lord. Would you guys buy a Nanobeam/Powerbeam and see what's simplicity looks like?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 9, 2014 11:18 AM, "John Butler via Af" <[email protected]> wrote: > Sorry for the difficulties in assembly. We have an updated Assembly > Guide that should produce more consistent results. We are in the process > of posting it at our support site and the Cambium Forum. In the meantime, > I am attaching it. > > > > Regards, > > > > John Butler > > > > > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Kade Sullivan via > Af > *Sent:* Tuesday, December 09, 2014 9:10 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] Force 110 assembly - anyone else having problems? > > > > Maybe try another one out of the 4 pack and see if it's the same way? > Maybe you just got "lucky" with the first one... > > > > On Mon, Dec 8, 2014 at 11:19 PM, Alan West via Af <[email protected]> wrote: > > Does not work for me. I tried it that way, could only get one of the four > tabs to lock. The tolerances are way tight on this unit. It took all my > might to get the feedhorn in the hole of the dish (putting the horn in > first), and it will not bottom out like it is supposed to so the tabs can > reach their holes. This is a major disappointment for me. > > > > On Monday, December 8, 2014 11:09 PM, Mathew Howard via Af <[email protected]> > wrote: > > > > I've only put one together so far, but the feedhorn went in fine... it > took a bit of pressure, but nowhere near breaking anything. > > ------------------------------ > > *From:* Af [[email protected]] on behalf of George Skorup (Cyber > Broadcasting) via Af [[email protected]] > *Sent:* Monday, December 08, 2014 10:58 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] Force 110 assembly - anyone else having problems? > > That's what I thought at first, I'ma gonna break somethin... > > I stuck the feedhorn in first. Put the back bracket and mount on. Put the > four allen-head screw in hand tight. Put some pressure on the front of the > feedhorn and push on the back of the bracket at each of the four locking > tab points. They click in place. Tighten the four allen screws. Put the > front reflector on, mount the radio, etc. Fairly easy after the first one. > > On 12/8/2014 10:35 PM, Alan West via Af wrote: > > Just got my four pack in. Opened the box, all nicely packed. Started my > first assembly. Got the bracket put on the dish. No problems. Now I get to > the feedhorn push in. Yah right. This thing will not just "click" in place > like the video shows. There is no way this feed horn I have will push far > enough for the tabs to go into the holes for them....I would probably break > something. Seriously, I put the Force 100 together faster, and you know how > bad it is...I hope the other three are not like this or they will go back > to the supplier. > > > > > > >
