Sweet! I have everything fused. Still having problems keeping these APs powered/linked though. Thought I'd ask if they could damage or infect the AP somehow.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 9, 2014 8:35 PM, "George Skorup (Cyber Broadcasting) via Af" < [email protected]> wrote: > Well, if it's not HV, then it would obviously clamp the PoE voltage. And > if you're not over-current protecting, then yeah, it'll probably burn up > the components on the card. I did that on one of the GigE-APC-POE's. > Powered an airFiber on the bench and some static discharged. No fuse, no > grounding. It just smoked until I unplugged it. There was a LOT of current > available (>6A of 56VDC). Stupid me. > > But I have had protected over-current situations. Fuse blew and the SS > still works fine. Nearby lightning strikes inducing some surges. > > On 12/9/2014 7:28 PM, Josh Luthman via Af wrote: > > When you say boom you mean the card would appear damaged? What if you > put the card in another situation and just do typical ethernet, would it > work? > > My problem is one AP doesn't turn on at all, two have ethernet problems > (link up/down), one reboots when I hit refresh (seriously) > > I ordered 12 and from my pictures I can see the middle set says HV in > black ink. Unfortunately that means I definitely can't see the ink on the > outer two cases so I'll have to climb to see if they're HV for sure. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Dec 9, 2014 at 8:20 PM, George Skorup (Cyber Broadcasting) via Af > <[email protected]> wrote: > >> I think all pins or pairs on the non-PoE GigESS's are clamped under 10 >> volts. So.. boom? >> >> Are you sure you didn't get regular 10/100 APC PoE SS's? And that's why >> your GigE isn't working? >> >> I believe the GigESS-HV's are pretty clearly marked/stamped as HV. At >> least the ones I have in the PRM24 chassis in the NOC are. Yep, just >> looked, the back of the handle is stamped HV. >> >> >> On 12/9/2014 6:49 PM, Josh Luthman via Af wrote: >> >>> Has anyone plugged one in to see what would happen? Does the card just >>> blow as soon as you power it up? >>> >>> As far as I know, every APC card I've gotten in the last several months >>> have been GigEAPC-HV but I'm curious to know what would happen if maybe I >>> was shipped the wrong units... >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >> >> > >
