Yeah, what Steve said. LOL. -Ty
On Wed, Dec 10, 2014 at 9:11 AM, That One Guy via Af <[email protected]> wrote: > we have IP aliases on the WAN side for all the different radio systems > with the interface still set to DHCP, this way we only need one ESSID and > DHCP Pool on the inside. the techs can plug the radio into it to manage the > radio until its provisioned, then still access it via the pop router after > its been provisioned > > On Wed, Dec 10, 2014 at 9:07 AM, Vlad Sedov via Af <[email protected]> wrote: > >> This is the product of boredom, some dremel bits, and a large collection >> of old power tools.. >> >> The switch controls DC polarity, so UBNT and Cambium radios can be >> powered from the same jack. >> The router is set up with several SSIDs, and each one has its own DHCP >> pool. That way, you can attach to the proper SSID with your mobile device, >> and it will put you on the same subnet as the radio. Yet another SSID is >> used basically as a home wifi router, so if the radio is moved to the WAN >> port, the rig can be used to get online. >> This is a very crude prototype, but it works great, and battery lasts a >> very long time. Going to migrate it all into a belt pouch. >> Being able to charge battery packs on their original charging dock is >> also pretty handy. >> >> >> peace >> >> Vlad >> >> >> --- >> This email is free from viruses and malware because avast! Antivirus >> protection is active. >> http://www.avast.com >> > > > > -- > All parts should go together without forcing. You must remember that the > parts you are reassembling were disassembled by you. Therefore, if you > can't get them together again, there must be a reason. By all means, do not > use a hammer. -- IBM maintenance manual, 1925 >
