Don't know. It's a one-time thing after the software upgrade from some
unknown earlier version to some recent version. I was never able to
narrow it down exactly since it usually only happens once with the upgrade.
Mark
On 12/17/14, 5:24 PM, Matt via Af wrote:
Does the 13.3 beta fix this?
Yes. Are you using traps?
If so there is a really weird bug after an upgrade - try setting all the
trap receiver settings in the SM back to 0.0.0.0 and save the settings but
don't reboot. See if you get a SNMP response - you should. Undo the saved
changes under 'unit settings' and SNMP works again. Got me.
Mark
On 12/17/14, 5:13 PM, Matt via Af wrote:
Graphing signal strength and Ethernet traffic on many BH20's and
PTP430's on our network using MRTG and SNMP. They are all running
13.1.3 release. Thought the same settings would work with PTP450
running 13.2 as long as SNMP settings were same. Not working. Anyone
else graphing the PTP450?
--
Mark Radabaugh
Amplex
[email protected] 419.837.5015 x 1021
